Noise Activated Warning Sign with Remote Mic - GA902R

The GA902R Noise Warning Sign activates only when the noise exceeds a pre-set level allowing exposed workers to wear ear defenders only when absolutely necessary. Being of rugged construction, the GA902R noise warning sign is suitable for most industrial situations. It is also available in Stainless Steel for the food and pharmaceutical industry. Noise warning text is generally supplied to EC requirements, but alternative graphic and languages are available to order. Fitting the optional Remote-Beacon greatly increases the noise warning impact, especially in large areas.

The GA902R Noise Activated Warning Sign is a self-contained unit housing its electronics in a tough case and is easily installed and set for action. It features an external microphone ideal for use in areas where the main unit cannot be fitted. The front panel noise warning text is available as standard in EC or USA forms, but can be ordered in any language and a variety of colours. The front panel is completely blank when idle but brilliantly lit when activated to give an easily noticed warning. Outputs from the master unit can also trigger other external devices such as machines or process cut-off actuators - a complete system.

The GA902R Noise Warning Sign can easily be made into a system with the addition of slave units which are powered from the master. Two masters can also be linked to work together. These features can greatly extend the scope of your system, whilst keeping the number of units to a minimum.

The external microphone enables the sign itself to be in a prominent position while the microphone can be placed closer to a major noise source.

Technical Data - GA902R Noise Activated Warning Sign:
MEASURING RANGE:75 dB to 112.5dB steps switch selectable 2.5dB variable calibration control (factory set at 85dB)
TRIP TIME: User adjustable 5 to 30 seconds
CONTROLS: Push to test button Mains power on indicator
DETECTOR: Characteristic: Averaging
FREQUENCY WEIGHTING: ‘A’ in accordance with IEC651 Type 2
TIME RESPONSE: Slow response (1000 mS)
MICROPHONE: External Condenser Microphone, Preamp output impedance 550R Cable Mounted
OUTPUTS: Switched AC power feed for external beacon and Change-over relay contact sets
POWER: 200v to 240v AC 50Hz/60Hz or 110v to 120v AC 50Hz/60Hz
ILLUMINATION: Two 8w, 12 inch fluorescent tubes
BEACONS: The GA902R is available with an optional Remote Beacon or with Mini-beacon
DIMENSIONS: Overall: 520 x 200 x 120 mm
Viewable Screen area: 450 x 190 mm

The following screen displays are available - please state your preference in the notes box when ordering:
Approved Hearing Protection Must Be Worn (Blue Text)
Approved Hearing Protection Must Be Worn (Red Text)
Picture Only - No Wording
Reduce Noise
Music Too Loud
Ear Protectors Optional
Gehoo-Bescherming Verplicht
Horselvern Pabudt
E'obbligatorio L'uso Delle Cuffie
Horevaern Pabudt
Hog Anvand Ljudniva Horselskydd
Proteccao Obrigatoria Dos Ouvidos
Custom Text (Additional cost £94.00)

Delivery usually within 5 working days.