Quick Fit Instant Noise Limiter

Instant NLX™ Noise Limiter - easy DIY installation or use as portable unit. Ideal for marquees. Approved by Environmental Health Departments. No professional installation required. Supplied complete with full instructions. Optional locking mains socket cover to prevent bypassing.

The Instant Sound Limiter has been designed in response to demand for a low cost, easy to install solution to the growing problem of noise complaints. It has been approved by many environmental health departments. For unsupervised venues we recommend that the NLX™ Noise Limiter is permanently installed so that it has control of all available mains socket outlets.

The unit is housed in a tough steel case fitted with 2.2 metres of mains cable and a 13 amp plug. On the front of the unit is a two gang, 13 amp mains socket into which the sound equipment is plugged. The sound level in the venue is monitored by the built in microphone and if your preselected level is exceeded the amber and red LEDs on the unit begin to light sequentially as a warning. If the sound remains too loud for a period of approximately 10 seconds mains power is disconnected from the sound equipment for 10 seconds and then automatically reconnected; thus no user intervention is required for operation. The trigger level is adjustable without the need to remove the front cover (portable version only - fixed version has internal adjustment to prevent tampering) and comprehensive instructions are supplied to facilitate easy calibration. Adjustment of the sensitivity to bass and treble frequencies can be carried out if necessary, similarly the trigger / reset time period

Lime Technologies offer free telephone technical support to assist with installation and setup, although this is seldom required as the system is so easy to install - just plug in and play the music.

Lime Instant NLX™ features
• Robust steel case
• Built-in level indicator
• Built-in microphone
• 2.2 metre mains cable & 13 amp plug
• Incorporates 13 amp double mains socket for easy connection of sound equipment
• Fire alarm interface
• Fully automatic operation
• Simple sound level adjustment
• Variable time delay
• Adjustable frequency response
• Active or monitor modes
• Designed by installers
• Straightforward DIY fitting
• Low cost
• Extremely reliable
• Approved by Environmental Health Departments
• Dimensions 37 x 26 x 12 cm
• Weight 4kg

• Optional high intensity warning beacon - recommended when noise limiter is not in performers direct line of sight.
• Optional locking mains socket cover to prevent bypassing

Note: A sound level meter will be required if you wish to set the trigger level to a specific sound pressure (dB) level - Click here for details.

*** IN STOCK ***
Delivery usually 2-3 days


Instant Noise Limiter shown with
optional high intensity warning beacon >